How Jefferson Millwork & Design Inc. Optimized Their Production Process with Expert Tooling

Print Friendly, PDF & Email

While it’s easy to put the majority of focus on the machine, your tooling has a major impact on your production efficiency. It creates a vicious cycle when tooling needs to be constantly serviced or replaced. Tools going out the door for frequent service results in an unnecessarily large tooling inventory just to keep machines running.  Additionally, tooling that wears out quickly forces manufacturers to buy new tooling more often.

When Tom Jewell with Jefferson Millwork & Design Inc, a nationally recognized, award-winning architectural and cabinet woodworking manufacturer, contacted Leitz for information on new router bits, their Leitz representative went beyond only providing pricing. After hearing Tom’s issues with dust collection and how quickly they were running through router bits, their Leitz representative offered to come to their location, review their application, and develop a plan to resolve the problems that were slowing down and adding cost to the manufacturing process.

Jefferson Millwork & Design Inc implemented Leitz Diamaster Pro diamond router bits and the Leitz ThermoGrip chuck. They are now experiencing a 6-7x improvement in the life of the tool. The longer tool life has helped them cut costs and reduce the downtime required to replace the bit while improving product quality. The Leitz ThermoGrip tool holding system uses an inductive heating concept to provide stronger, more concentric tool clamping. This leads to increased tool life, better surface finishes, and improved cost efficiency.

Inefficient dust collection was also plaguing Jefferson Millwork & Design Inc’s manufacturing process. To clear dust, the machine had to be shut-down and the dust manually blown off of the table. Adding an extra step and completely stopping production each time dust collection was required was a costly inefficiency that slowed output. Leitz installed a turbine to help with dust collection and eliminate the extra step and production shutdown.

By working hands-on with Tom and the team at Jefferson Millwork & Design, their Leitz representative was able to identify key areas to optimize the overall production process. Because of Leitz’ commitment to partnering with customers to ensure they are as profitable and successful as possible, the customer is saving time, saving money and has an improved cut quality. Jefferson Millwork is so pleased with the results, they are implementing an additional three set-ups and running the Leitz solution on all their applications.

Form a partnership for continuous improvement with Leitz. 

Get in touch with your Leitz representative by calling 800.253.6070or filling out the form below.