5. Cutting tools with shank

5.1 Grooving

Routers
Number of teeth: Z 1+1
RPM: n 18000 - 36000 min-1
Routers
Diagram to determine feed speed vf depending on grooving depth ap, D 8 - 12 mm

Router cutter Diamaster PRO
Workpiece material:
Chipboard plastic coated
Operation: Sizing
RPM: n 18000 min-1
Correction factor vf: MDF = 0,8;
Chipboard = 1,1;
Veneer across grain = 0,7
Routers
Diagram to determine feed speed vf depending on grooving depth ap, D 20 mm

Router cutter Diamaster PRO
Workpiece material:
Chipboard plastic coated
Operation: Sizing
RPM: n 18000 min-1
Correction factor vf: MDF = 0,8;
Chipboard = 1,1;
Veneer across grain = 0,7

Router cutter Diamaster PRO

Routers

Router cutter for sizing + pre-cutting, DP PRO-tipped, Z1+1, finishing, with HW plunging tip, suitable for small and medium sized batches.

Z 1+1
WO 140-2-50 *
Class.D
mm		GL
mm		NL
mm		S
mm		ID Nr.
LL		 ID Nr.
RL		 
*10702212x40  091264•
*12702212x45  091265•
*121002825x60  091266•
*14902816x50  091267•
*16802216x50  091268•
*16952225x60  091269•
*16902816x50091271•091270•
*161002816x50  091272•
*16953520x50  091273•
*161053525x60  091274•
*161154325x60091276•091275•
*18902820x50  091277•
*18953520x50  091278•
*181053525x60  091279•
*181054320x50091281•091280•
*181154325x60  091282•
*20902816x50  091283•
*201002825x60091285•091284•
*20953520x50  091286•
*201053525x60  091287•
*201054320x50091289•091288•
*201154325x60  091290•
*201104820x50091292•091291•
*201204825x60091294•091293•
*201255325x60  091295•
Z 1+1
WO 140-2-50 *
Class.D
mm		D
Inch		GL
mm		GL
Inch		NL
mm		NL
Inch		S
mm		S
Inch		ID Nr.
RL		 
*12,71/2"702 3/4"22,237/8"12,7x381/2" x1 1/2"091296•
*19,053/4"11043/8"481 7/8"19,05x503/4" x2"091297•
Routers
Number of teeth: Z 2+2, Z 2+2/3+3
RPM:
D 22 mm: n 16000 - 30000 min-1
D 25 mm - RL + LL-Router cutter:
n max. 24.000 min-1
Routers
Diagram to determine feed speed vf depending on grooving depth ap
1 = Jointing
2 = Sizing

Router cutter PRO, Z 2+2
Workpiece material:
Chipboard plastic coated
Operation: Jointing, Sizing
RPM: n 18000 min-1
Correction factor vf: MDF = 0,6;
Veneer, across grain = 0,7

Router cutter Diamaster PRO

Routers

Router cutter for sizing and pre-cutting, DP PRO-tipped, Z2+2, finishing, with HW-plunging tip, suitable for small and medium sized batches.

Z 2+2
WO 140-2-50 *
Class.D
mm		NL
mm		S
mm		ID Nr.
RL		 
*222820x50091222•
*222825x60091224•
*223820x50091226•
*223825x60091228•
*224820x50091230•
*224825x60091232•

Router cutter for sizing + pre-cutting, DP PRO-tipped, Z2+2, finishing, design with right hand and left hand rotation. Combination tool suitable for tear-free machining of coated workpieces. Both right and left hand rotation, without the need for a tool change. To be mounted in Hydro- or ThermoGrip shrink fit chucks.

RL + LL - Combination tool
WO 140-2-50 *
Class.D
mm		GL
mm		NL
mm		S
mm		DRIID Nr.
RL		 
*2514535+3525x55RL / LL191020•
Routers
Number of teeth: Z 2+2
RPM: n 16000 - 36000 min-1

Routers
Diagram to determine feed speed vf depending on grooving depth ap, D 20 mm
Router cutter Diamaster QUATTRO,
Z 2+2
Workpiece material:
Chipboard plastic coated
Operation: Sizing
RPM: n 18000 min-1
Correction factor vf: MDF = 0,6;
Paper coated = 0,8

Routers
Diagram to determine feed speed vf depending on grooving depth ap, D 20 mm
Router cutter Diamaster QUATTRO,
Z 2+2
Workpiece material:
Chipboard plastic coated
Operation: Jointing
RPM: n 18000 min-1
Correction factor vf: MDF = 0,9;
Paper coated = 0,8;
Veneer across grain= 0,8

Router cutter Diamaster QUATTRO Z 2+2

Routers

High performance router cutter for sizing + pre-cutting, DP PLUS-tipped, Z2+2, finishing, with HW plunging tip. Suitable for machining coated timber and composite material workpieces at high feed speeds. Higher performance than Z1+1 DP routing tools.

WO 140-2 *
Class.D
mm		GL
mm		NL
mm		S
mm		ID Nr.
LL		 ID Nr.
RL		 
*20902820x50091234•091235•
*201002825x60  091237•
*201003820x50  091239•
*201103825x60  091241•
*201104820x50  091238•
*201204825x60091246•091247•
*251002825x60  091249•
*251103825x50091250•091251•
*251104820x50  091245•
*251204825x60091252•091253•
Routers
Number of teeth: Z 3+3
RPM: n 16000 - 37000 min-1

Routers
Router cutter Diamaster PLUS, Z 3+3
Workpiece material:
Chipboard plastic coated
Operation: Sizing
RPM: n 24000 min-1
Correction factor vf:
MDF = 0,8; Paper coated = 0,8

Routers
Router cutter Diamaster PLUS, Z 3+3
Workpiece material:
Chipboard plastic coated
Operation: Jointing
RPM: n 24000 min-1
Correction factor vf:
MDF = 0,9;
Paper coated = 0,8;
Veneer across grain= 0,8

Router cutter Diamaster PLUS Z 3+3

Routers

High performance router cutter for sizing + pre-cutting, DP PLUS-tipped, Z3+3, finishing, with DP-plunging tip. Suitable for machining coated timber and composite workpieces at high feed speeds. Higher performance than Z1+1 and Z2+2 DP routing tools. Negative twist to support the clamping of small workpieces.

WO 140-2 *
With negative twist
Class.D
mm		GL
mm		NL
mm		S
mm		ID Nr.
LL		 ID Nr.
RL		 
*181002425x60  091204•
*20902420x50  091207•
*201002425x60  091209•
*201053025x60091170•091171•
*201103825x60  091211•
*201104620x50  091172•
*201204625x60  091174•
*251002425x60  091213•
*25953020x50  091175•
*251053025x60091176•091177•
*251103825x60091214•091215•
*251204625x60091179•091180•

High performance router cutter for sizing + pre-cutting, DP PLUS-tipped, Z3+3, finishing, with DP-plunging tip. Suitable for machining coated timber and composite workpieces at high feed speeds. Higher performance than Z1+1 and Z2+2 DP routing tools. Positive twist for optimum chip removal into the extraction. Firm clamping necessary for small workpieces.

WO 140-2 *
With positive twist
Class.D
mm		GL
mm		NL
mm		S
mm		ID Nr.
LL		 ID Nr.
RL		 
*161002420x60  091254•
*251103825x60091216•091217•
*251204625x60091218•091219•


•  available ex stock
+ available at short notice