6. Drilling

6.8 Adaptors

Drilling
Drilling

Conventional bore clamping systems

Precise clamping from two clamping screws with ring shaped, notched pressure zone. Smallest possible pitch with 10 mm shanks – 21 mm. For smaller pitches use 8 mm shank adaptors.

PM 320-0-28 *, PM 320-0-29 **, PM 320-0-30 ***, PM 320-0-32 ****, PM 320-0-34 *****, PM 320-0-40 ******, PM 320-0-42 *******, PM 320-0-46 ********, PM 320-0-50 *********
Class.MachineGL
mm
SID Nr.
LL
 ID Nr.
RL
 
*Lehbrink, Nottmeyer
(new machine type)
40C033080033081
**Lehbrink, Nottmeyer
(new machine type)
52C033082033083
***Bilek, Knoevenagel55E033084033085
****Alberti, Balestrini, Biesse, Böttcher & Gessner, Busellato, Goma, Grotefeld, Hüllhorst, Holz-Her, Koch, Morbidelli, Reimall, Torwegge, Vitap (after year 4/91), Weeke43D033086033087
*****Nottmeyer
(old machine type)
40A033088033089
******Alberti, Balestrini, Bilek, Busellato, Dubus, Goma, Grotefeld, Ompec, Reimall, SCM, Schleicher, Tanzani, Viciani, Vitap (before year 4/91), Weingärtner45,5F033090033091
*******Ayen, Brandt, Holzma, Knoevenagel, Mayer, Reichenbacher, Torwegge, Zubiola40B033092033093
********Morbidelli51G033094033095
*********Scheer45H033096033097


Spare parts
BEZABMID Nr. 
KeySW3005433
ScrewM 5x10005836
Drilling
Drilling
Drilling

Quick-change drill adaptor

The drills are clamped in the chuck by a special length setting screw (Id. 7408). Quick-change drill adaptors are ideal for quick and individual adjustment of the boring pattern. To protect the empty quick clamping chucks, seal with the dust cover. Note: to work correctly, the shanks need the correct shank and clamping flat tolerances. Only drills from the Leitz-programme guarantee reliability. RPM up to 12000 min-1 (quick-change drill adaptor without drills must be sealed with the dust cover Id. 115521 to prevent unbalance.

PM 320-0-55 *, PM 320-0-56 **, PM 320-0-57 ***, PM 320-0-58 ****
Class.MachineGL
mm
SDRIID Nr. 
*Nottmeyer
(new machine type)
45ALL033098
*Nottmeyer
(new machine type)
45ARL033099
*Alberti, Balestrini, Biesse, Böttcher & Gessner, Busellato, Goma, Grotefeld, Hüllhorst, Holz-Her, Koch, Morbidelli, Reimall, Torwegge, Vitap (after year 4/91), Weeke46DLL033100
*Alberti, Balestrini, Biesse, Böttcher & Gessner, Busellato, Goma, Grotefeld, Hüllhorst, Holz-Her, Koch, Morbidelli, Reimall, Torwegge, Vitap (after year 4/91), Weeke46DRL033101
*Lehbrink, Nottmeyer
(old machine type)
45CLL033102
*Lehbrink, Nottmeyer
(old machine type)
45CRL033103
*Ayen, Brandt, Holzma, Knoevenagel, Mayer, Reichenbacher, Torwegge, Zubiola45BLL033104
*Ayen, Brandt, Holzma, Knoevenagel, Mayer, Reichenbacher, Torwegge, Zubiola45BLL033105


Accessories
BEZABMID Nr. 
Fitting toold10/D20/L43,2/SW17115522
Dust coverd10/D18/L31,2115521
Clamping + adjusting screwM 5x17007408
Drilling
When clamping, please note:
– minimum clamping length
l min = 20 mm
– maximum clamping length
l max = 29 mm
Drilling
– Do not clamp conical shanks.
– Use cylindrical shanks, without clamping flats, grooves or notches.
Drilling
– The clamping flat must not touch the clamping wedges.

Adjustable drill chuck

Precise design with high concentricity < 0,02 mm. Special clamping mechanism prevents the tool shank slipping. Adjustable clamping range from 0,5-13 mm (SK30, ISO 30, SK40), 3-16 mm (HSK-E/-F63). Balanced tool body. Wear resistant, hardened clamping wedges. Suitable for left and right hand rotation. Only suitable for drills.

PM 330-0 *
Class.MachineD
mm
d
mm
S
mm
A
mm
Weight
kg
ID Nr. 
*MAKA, Reichenbacher, Weeke530,5-13SK30941,3037700+
*Biesse
after year 9/92
530,5-13SK30941,3037701+
*Alberti530,5-13SK30941,3037702+
*Morbidelli, SCM580,5-13ISO301021,4037706
*Homag, MAKA, Reichenbacher, SCM, Stegherr520,5-13SK40941,5037704
*IMA after year 9/94, Dubus, Eima, Homag, Weeke523-1HSK-F 631001,6037705
*CMS523-1HSK-E 631001,7037707


Spare parts
BEZABMID Nr. 
KeySW4005451


•  available ex stock
+ available at short notice