|
1. Sawblades |
1.5 Panel sizing sawblades
Scoring sawblades |
 |
For noise reduced sizing uncoated timber products
Designed for low-noise sizing timber products coated with foil or plastics. For sizing machines and panel sizing machines with scoring sawblade and pressure beam.
Noise reduced design AS-low-noise foil right hand – noise reduction up to 10 dB(A). Vibration-damping composite saw body construction. |
 |
WK 872-3 *
| Class. | D
mm | SB
mm | TDI
mm | BO
mm | NLA
mm | Z | ZF | ID Nr. | |
| * | 300 | 4,4 | 2,8 | 80 | 2/14/110
2/7/110 | 60 | FZ/TR | 065338 | • |
| * | 350 | 4,4 | 3,0 | 80 | 2/14/110
2/7/110 | 72 | FZ/TR | 065339 | • |
| * | 380 | 4,8 | 3,5 | 60 | 2/14/100 | 72 | FZ/TR | 065337 | • |
| * | 400 | 4,4 | 3,0 | 80 | 2/14/110
2/7/110 | 72 | FZ/TR | 065340 | • |
| * | 450 | 4,4 | 3,0 | 80 | 2/14/110
2/7/110 | 72 | FZ/TR | 065341 | • |
| * | 450 | 4,8 | 3,5 | 60 | 2/14/125 | 72 | FZ/TR | 065349 | • |
Select the sawblade so that the foil is on the unclamped side of the workpiece when cutting. |
 |
For sizing coated timber products, Diamaster PRO
Designed for sizing abrasive timber products. Diamond-tipped (DP) for sizing machines and panel sizing machines with scoring sawblade and pressure beam. Tip height 4,5 mm; regrinding area 2,0 mm. |
 |
WK 852-2-DP *
| Class. | D
mm | SB
mm | TDI
mm | BO
mm | BO max
mm | FLD
mm | Z | ZF | ID Nr. |
| * | 300 | 4,4 | 3,2 | 30 | 80 | 120 | 60 | FZ/TR | 090578 | + |
| * | 350 | 4,4 | 3,2 | 30 | 100 | 120 | 60 | FZ/TR | 090579 | + |
| * | 350 | 4,4 | 3,2 | 30 | 100 | 120 | 72 | FZ/TR | 090580 | + |
| * | 400 | 4,4 | 3,2 | 30 | 100 | 140 | 72 | FZ/TR | 090582 | + |
|
|
For sizing with scoring sawblade DP – Diamaster PRO
Designed for sizing uncoated and veneered timber products. For saw benches, sizing, cut-off and panel sizing saw machines with scoring sawblade. Tip height
4,5 mm; regrinding area 2,0 mm. |
|
WK 850-2-DP *
| Class. | D
mm | SB
mm | TDI
mm | BO
mm | BO max
mm | FLD
mm | Z | ZF | ID Nr. |
| * | 300 | 3,5 | 2,5 | 30 | 80 | 120 | 60 | WZ | 090641 |
|
| |
Designed for sizing plastic coated wood and composite constructions and plastic
sheets. For saw benches, sizing, cut-off and panel sizing saw machines with scoring sawblade. Tip height 4,5 mm; regrinding area 2,0 mm. |
 |
WK 852-2-DP *
| Class. | D
mm | SB
mm | TDI
mm | BO
mm | BO max
mm | NLA
mm | FLD
mm | Z | ZF | ID Nr. |
| * | 300 | 3,5 | 2,5 | 30 | | 2/10/60 | 120 | 60 | FZ/TR | 090638 |
• available ex stock
+ available at short notice |
|
