1. Sawblades

1.2 Sawblades for cutting along grain

Designed for square cuts and shoulder kerfs in wet, dry and long fibred woods. With two exterior wiper teeth and two interior wiper teeth (from D-280 mm) and a large sideways tooth projection.

With exterior and interior wiper teeth

Sawblades

Designed for square cuts and shoulder kerfs in wet, dry and long fibred woods. With two exterior wiper teeth and two interior wiper teeth (from D-280 mm) and a large sideways tooth projection.

WK 100-2-43 *

Class.	Machine	D mm	SB mm	TDI mm	BO mm	BO _max. mm	DKN mm	FLD _max. mm	Z	ZF	ID Nr.
*		250	4,4	2,8	30	80		130	18	FZ	067000	•
*		300	5	3,2	30	80		130	20	FZ	067001	•
*	Raimann	300	5	3,2	80		23/9	11	20	FZ	067003	+
*		350	5	3,2	30	100		130	24	FZ	067004	•
*		400	5	3,2	30	120		150	28	FZ	067005	•
*		450	5	3,2	30	120		160	24	FZ	067026	•

Designed for medium kerfs in wet, frozen, dry and long fibred woods. With two exterior wiper teeth and two interior wiper teeth (from D-280 mm) and a large sideways tooth projection.

WK 100-2-43 *

Class.	Machine	D mm	SB mm	TDI mm	BO mm	BO _max. mm	DKN mm	FLD _max. mm	Z	ZF	ID Nr.
*		250	3,5	2,2	30	80		13	18	FZ	067006	•
*		300	3,5	2,2	30	80		110	20	FZ	067024	•
*	OGAM	300	3,5	2,2	75		17/87	110	20	FZ	067009	+
*	Raimann	300	3,5	2,2	70		21/83	110	20	FZ	067008	•
*	Raimann Costa Storti	300	3,5	2,2	80		23/90	110	20	FZ	067029	•
*		350	4	2,8	30	100		130	24	FZ	067015	•
*		400	4	2,8	30	120		150	28	FZ	067030	•
*		450	4,4	3,0	30	120		160	24	FZ	067031	•

Designed for medium kerfs in dry woods up to wood moisture 15%. With two exterior wiper teeth and two or four (from D-280 mm) interior wiper teeth.

WK 150-2-43 *

Class.	D mm	SB mm	TDI mm	BO mm	BO _max. mm	DKN mm	Z	ZF	ID Nr.
*	250	3,2	2,2	70		20,6/83	20	WZ	068750	•
*	300	3,2	2,2	70	80	20,6/83	24	WZ	068751	•
*	300	3,2	2,2	80	90	12,2/88	24	WZ	068752	•
*	320	3,2	2,2	70	80	20,6/83	28	WZ	068753	•
*	350	3,5	2,5	70	100	20,6/83	28	WZ	068755	•
*	400	4,0	2,8	70	100	20,6/83	24	WZ	068756	•

• available ex stock
+ available at short notice

Thin kerf sawblades with interior wiper teeth

Sawblades

Designed for thin lamella cuts on horizontal spindles in dry woods up to wood moisture 10%. With three interior wiper teeth and minimised cutting width. Tool body – tooth shape with chip thickness limitation (Art. Nr. WK 100-4-44; sawblades with D <= 280 mm).

WK 100-2-44 *, WK 100-4-44 **

Class.	Machine	D mm	SB mm	TDI mm	BO mm	BO _max. mm	DKN mm	FLD _max. mm	Z	ZF	ID Nr.
**		200	2,4	1,6	30	60		100	22	FZ	067200	•
**		220	2,4	1,6	30	80		120	24	FZ	067201	•
**		250	2,4	1,6	30	90		120	24	FZ	067202	•
**	Raimann Torwegge	250	2,4	1,6	70		21/83	120	24	FZ	067203	•
**	Costa	250	2,4	1,6	80		13/89	120	24	FZ	067204	•
*		300	2,8	1,8	30	100		140	30	FZ	067212	•
*	Raimann	300	2,8	1,8	70		21/83	140	30	FZ	067213	•
*	Costa	300	2,8	1,8	80		13/89	140	30	FZ	067214	•
*		350	3,0	2,0	30	110		150	30	FZ	067216	•

Thin kerf sawblades with interior and exterior wiper teeth

Sawblades

Designed for thin, horizontal lamella cuts in hard woods (SB < 2,0 mm) and hard and soft woods (SB >= 2,0 mm) on moulders with splitting unit. With two exterior wiper teeth (D < 250 mm) and two exterior and two interior wiper teeth (D >= 250 mm). Reduced resin build up and higher cutting performance from a special coating to reduce adhesion and friction.

WK 100-2-43 *

Class.	D mm	SB mm	TDI mm	BO mm	BO _max. mm	NLA mm	FLD _max. mm	Z	ZF	ID Nr.
*	220	1,8	1,2	65	80	3/11/80	120	27	FZ	067039	•
*	225	1,6	1,2	60	80	3/10/75	130	33	FZ	067040	•
*	250	2,4	1,6	30	80	3/10/75	100	12	FZ	067041	•
*	250	2,5	1,8	60	80	3/10/75	120	40	FZ	067032	•
*	270	2,4	1,6	60	80	3/10/75	120	28	FZ	067033	•
*	300	2,8	2,0	60	80	3/10/75	140	30	FZ	06703	•
*	325	2,4	1,6	60	80	3/10/75	130	28	FZ	067042	•
*	325	2,8	1,8	60	80	3/10/75	120	18	FZ	067043	•

• available ex stock
+ available at short notice