GlossCut - cutting quality in PMMA

  • Transparency cut quality of Leitz GlossCut saw-blade
  • Transparency cut quality of competitors saw-blade
Materials:
  • Transparent thermoplastics (PMMa , PC)
  • Duro plastics
  • Plastic / Alu-composite materials (Alucobond)
  • Plastic sheet, vinyl and aluminum extrusions, MDF, with and without laminate
  • Solid wood along grain
  • Full transparency after one step of flame scarfing or polishing

GlossCut - The sawblade for transparent materials

  • New tooth shape with two cutting angles ensures cuts which are almost free of "striping" marks and breakouts along the edge
  • Vibration Dampening saw body through new laser ornament technology
  • *Patent Pending

    1. Sawblades

    1.4 Sizing sawblades

    Sawblades

    RPM: n=4.200-7.600 min¹

    For sizing in finish quality - Glosscut

    Sawblades

    Designed for sizing with the perfect cut faces and tear-free cut edges. For sizing and cutting length of transplant thermoplastics (PMMA, PC), duro plastics, plastic/alu-composite materials (Alucobond), MDF with and without coating. Vibration reduced sawplate by new laser ornaments - noise reduction whilst free running and in use.

    Sawblades

    With the new tooth shape and two cutting angles, minimum marks and tear-free cut edges can be achieved.

    For plexiglass subsequent flame deseaming is sufficient to achieve full transparency.

    Application:
    For sizing and cutting to length

    Machines:
    Saw benches, sizing machines with/without pre-scoring sawblade, vertical and horizontal panel sizing machines, double circular dimension saw machines against feed from top and/or bottom.

    Application:
    Main sawblade against feed

    WK 357-2
    D
    mm
    SB
    mm
    TDI
    mm
    BO
    mm
    NLA1
    mm
    NLA2
    mm
    ZZFID Nr. 
    300 3,0 2,4 30 2/10/60 2/7/42 60 FZFA/FZFA 761033
    300 3,0 2,4 302/10/602/7/42 96FZFA/FZFA 761034
    350 3,5 2,4 302/10/602/7/42 96FZFA/FZFA 761035
    450 4,5 2,4 302/10/602/7/42 72FZFA/FZFA 761036

    Advantages:

    • The combination of vibration reduced saw bodies and teeth and a newly developed geometry gives a cut quality, which can be improved with a little additional work to brilliance.
    • In coated wooden fibre boards with a scoring sawblade a finish quality on the edges can be achieved.
    • Because of reduction /omission of the usually additional processing steps to the work-piece, the result is increased efficiency.
    • A noise reduction compared to standard sawblades of up to 4 db(A) during the free running and working cycle makes for more comfortable working conditions for the operator.
    • A significant improvement in the run time of about 200% from the tool construction compared to standard sawblades another economic tool solution.
    • Resharpening possible on all known sawblade sharpening machines.