1. Sawblades

1.3 Sawblades for cutting across grain

Saw Blades

For cross cutting on optimising saw machines

Saw Blades

Designed for cutting to length and trimming solid woods, wet and dry at high feed rates for cycle times for example from 0,3-1,0 sec. With a large sideways tooth projection for splitting saw machines, end trimming and optimising saw machines.

Saw Blades WK 150-2 *, WK 150-2-11 **
Class.D
mm		SB
mm		TDI
mm		BO
mm		NLA
mm		ZZFID Nr. 
*4003,52.8302/15/63120WZ057525•
**4505,03,2302/15/63108WZ057524•
*4804,43.2706/8/220144WZ057527•
**5005,23,230 120WZ057516•
**5505,23,230 120WZ057517•
**6006,04,030 120WZ057518•
 

Designed for cutting to length and trimming solid woods, wet and dry at high feed rates for cycle times for example from 0,3-1,0 sec. With a large sideways tooth projection for splitting machines, end trimming and optimising saw machines. Noise-reduced design AS OptiCut – noise reduction up to 8 dB(A) in free running. Tool body with irregular pitched teeth.

Saw Blades WK 150-2 *
Class.D
mm		SB
mm		TDI
mm		BO
mm		NLA
mm		ZZFID Nr. 
*4504,83,5302/15/63138WZ057526•
*5004,83,5302/15/63144WZ057528•
*5204,63,4302/15/63144WZ057529•
*5505,23,2302/15/63160WZ057530•
*6005,44302/15/63172WZ057531•
*6006,04302/15/63120WZ057532•
*7005,54302/15/63200WZ057533+
Application diameter < 630 mm
For cross cutting and cutting off with especially high feed rates for cycle times of e.g. 0,30-1,00 sec.
•  available ex stock
+ available at short notice