|
1. Sawblades |
1.2 Sawblades for cutting along grain |
 |
Extremely thin cut

Optimised shoulder cut sawblade used as part of a set with thin kerf splitting sawblade.
For sizing solid woods in quality 0-1. Reduced resin build up and higher cutting performance from a special coating to reduce adhesion and friction. |
 |
WK 100-2-21 *, WK 150-2 **
Class. | D mm | SB mm | TDI mm | BO mm | BO max. mm | NLA mm | FLD max. mm | Z | ZF | ID Nr. | |
* | 180 | 5,0 | 4 | 60 | | 3/10/75 | 100 | 32 | FZ | 057435 | • |
* | 200 | 5,0 | 4 | 60 | | 3/10/75 | 120 | 36 | FZ | 057436 | • |
* | 220 | 3,8 | 3 | 60 | | 3/10/75 | 120 | 24 | WZ | 057461 | • |
* | 220 | 3,8 | 3 | 65 | | 3/11/80 | 120 | 24 | WZ | 057462 | • |
* | 225 | 5,0 | 4 | 30 | 110 | 3/10/75 | 120 | 25 | FZ | 057441 | • |
* | 225 | 5,0 | 4 | 60 | | 3/10/75 | 120 | 40 | FZ | 057437 | • |
* | 250 | 5,0 | 4 | 30 | 120 | 3/10/75 | 140 | 25 | FZ | 057442 | • |
* | 250 | 5,0 | 4 | 60 | | 3/10/75 | 140 | 36 | FZ | 057448 | • |
|
|
Designed for middle-cuts and thin lamella cuts to increase the wood yield. For sizing
solid woods quality 0-1. Reduced resin build up and higher cutting performance from a special coating to reduce adhesion and friction. |
 |
WK 100-2-21 *
Class. | D mm | SB mm | TDI mm | BO mm | BO max. mm | NLA mm | FLD max. mm | Z | ZF | ID Nr. | |
* | 180 | 5,0 | 4 | 60 | | 3/10/75 | 100 | 32 | FZ | 057435 | • |
* | 180 | 1,5 | 1 | 60 | 70 | 3/10/75 | 100 | 21 | FZ | 057443 | • |
* | 180 | 1,8 | 1,2 | 60 | 70 | 3/10/75 | 100 | 21 | FZ | 057444 | • |
* | 180 | 1,3 | 0,8 | 60 | 70 | 3/10/75 | 100 | 32 | FZ | 057418 | • |
* | 180 | 1,5 | 1 | 60 | 70 | 3/10/75 | 100 | 32 | FZ | 057419 | • |
* | 180 | 1,8 | 1,3 | 60 | 70 | 3/10/75 | 100 | 32 | FZ | 057412 | • |
* | 200 | 1,5 | 1 | 60 | 8 | 3/10/75 | 120 | 21 | FZ | 057445 | • |
* | 200 | 1,8 | 1,2 | 60 | 80 | 3/10/75 | 120 | 21 | FZ | 057446 | • |
* | 200 | 1,3 | 0,8 | 60 | 80 | 3/10/75 | 120 | 36 | FZ | 057420 | • |
* | 200 | 1,5 | 1,0 | 60 | 80 | 3/10/75 | 120 | 36 | FZ | 057421 | • |
* | 225 | 1,5 | 1 | 60 | 110 | 3/10/75 | 120 | 25 | FZ | 057447 | • |
* | 225 | 1,8 | 1,2 | 60 | 110 | 3/10/75 | 120 | 25 | FZ | 057448 | • |
* | 225 | 2,0 | 1,4 | 60 | 110 | 3/10/75 | 120 | 25 | FZ | 057449 | • |
* | 225 | 1,5 | 1,0 | 60 | 110 | 3/10/75 | 120 | 40 | FZ | 057422 | • |
* | 225 | 1,8 | 1,3 | 60 | 110 | 3/10/75 | 120 | 40 | FZ | 057423 | • |
* | 225 | 2,0 | 1,4 | 60 | 110 | 3/10/75 | 120 | 40 | FZ | 057416 | • |
* | 250 | 1,7 | 1,2 | 60 | 120 | 3/10/75 | 140 | 25 | FZ | 057450 | • |
* | 250 | 2,0 | 1,4 | 60 | 120 | 3/10/75 | 140 | 25 | FZ | 057451 | • |
* | 250 | 1,7 | 1,2 | 60 | 120 | 3/10/75 | 140 | 36 | FZ | 057433 | • |
* | 250 | 2,0 | 1,4 | 60 | 120 | 3/10/75 | 140 | 36 | FZ | 057434 | • |
Clamping sleeves TB 270-0 and PH 130-0-01 see section 1.9
|
 |
Extremely thin cut

Designed for middle-cuts and thin lamella cuts to increase the wood yield. For sizing solid woods of quality 0-1. Noise-reduced design AS OptiCut UT – noise reduction
up to 8 dB(A) in free running. Tool body with vibration-damping laser ornaments and irregular pitched teeth. Reduced resin build up and higher cutting performance from
a special coating to reduce adhesion and friction. |
 |
WK 100-2
Class. | D mm | SB mm | TDI mm | BO mm | BO max. mm | NLA mm | FLD max. mm | Z | ZF | ID Nr. | |
* | 220 | 1,2 | 0,8 | 60 | 80 | 3/10/75 | 120 | 32 | FZ | 057463 | • |
* | 220 | 1,4 | 1 | 60 | 80 | 3/10/75 | 120 | 32 | FZ | 057464 | • |
* | 220 | 1,4 | 1 | 65 | 80 | 3/11/80 | 120 | 32 | FZ | 057465 | • |
• available ex stock
+ available at short notice
|
|