3. Planing

3.2 Four-sided moulders
3.2.2 Finish planing

VariPlan planerhead
Planing
Planing
Design

Steel or Aluminium planerhead with resharpenable HS or HW reversible resharpenable knives positioned by form-locking knife clamping system.

Technical information

The VariPlan clamping system clamps new and resharpened knives in position automatically to a constant cutting circle.
As the clamping wedge is positioned behind the cutting edge the wedge is protected from dirt. Reduced noise level from the closed design.

Chip removal

Softwood: up to 10,0 mm. Hardwood: up to 8,0 mm.

No. of wings

2 to 4. 1,0 mm resharpening area with 2 cutting edges per sharpening cycle.

Cutting material

HS, HW

RPM

D = 100 mm, nmax. = 12.000 min-1
D = 125 mm, nmax. = 10.000 min-1
D = 140 mm, nmax. = 9.000 min-1

Note
– For fine finish planing, cutterheads can be supplied with a reduced distance between the chip breaker and cutting edge for a chip removal of up to 0,8 mm.

– The VariPlan clamping system clamps new and resharpened knives in position automatically to a constant cutting circle.

– Depending on the machine, the knives can be inserted axially or radially allowing removal of the knives on the machine.

Planing
Aluminum cutterhead with separate steel chip breaker.
Planing
Steel cutterhead with integrated chip breaker.
Planing
Open the clamping system.
Planing
Radial or axial knife removal possible.
Planing Close the clamping system. Knives clamped by form-fitting design assisted by centrifugal force.
Planing

VariPlan planerhead

Planing


Economic and ideal for high chip removal by solid resharpenable, reversible HS or HW knives. Constant diameter after resharpening axial or radial knife removal/ replacement possible on the machine.

Tool body of aluminium

Planing WW 240-2-05 *
Class.D
mm
SB
mm
ND
mm
BO
mm
BO max
mm
Zn max
min-1
ID Nr.
HS
 ID Nr.
HW
 
*1252102164045210000030367 030368 
*1252302364045210000030362030369
*1252102164045410000030370 030371 
*1252302364045410000030372030373
*1252402464045410000030374030375+


Spare knives
BEZQALABMVE STCKID Nr. 
VariPlan knives-SetHSB210; 2 part2610515
VariPlan knives-SetHWB210; 2 part2610715
VariPlan knives-SetHSB220; 2 part2610516
VariPlan knives-SetHWB220; 2 part2610716
VariPlan knives-SetHSB240; 2 part2610518
VariPlan knives-SetHSB240; 2 part2610718
Further dimensions and dimensions in inches available on request

Planing

VariPlan planerhead

Planing


Economic and ideal for high chip removal by solid resharpenable, reversible HS or HW knives. Constant diameter after resharpening axial or radial knife removal/ replacement possible on the machine.

Tool body of steel.

Planing WW 240-2-04 *
Class.D
mm
SB
mm
ND
mm
BO
mm
BO max
mm
Zn max
min-1
ID Nr.
HS
 ID Nr.
HW
 
*1251301364045210000030249030250
*1251501564045210000030251 030252 
*1251701764045210000030298 030299 
*1251801864045210000030253030254+
*1251901964045210000030255030256+
*12560664045410000030261 030262 
*12580864045410000030263 030264 
*1251001064045410000030265 030266 
*1251201264045410000030267 030268 
*1251301364045410000030240030269
*1251501564045410000030270030271+
*1251701764045410000030140030141
*1251801864045410000030241 030272 
*140130130506049000030282 030283 


Spare knives
Class.BEZQALABMVE STCKID Nr. 
 VariPlan knives-SetHSB60; 2 part2610501+
 VariPlan knives-SetHWB60; 2 part2610701
 VariPlan knives-SetHSB80; 2 part2610502+
 VariPlan knives-SetHWB80; 2 part2610702
 VariPlan knives-SetHSB100; 2 part2610504
 VariPlan knives-SetHWB100; 2 part2610704
 VariPlan knives-SetHSB120; 2 part2610505+
 VariPlan knives-SetHWB120; 2 part2610705+
 VariPlan knives-SetHSB130; 2 part2610506+
 VariPlan knives-SetHWB130; 2 part2610706+
 VariPlan knives-SetHSB150; 2 part2610509
 VariPlan knives-SetHWB150; 2 part2610709
 VariPlan knives-SetHSB170; 2 part2610511
 VariPlan knives-SetHWB170; 2 part2610711
 VariPlan knives-SetHSB180; 2 part2610512
 VariPlan knives-SetHWB180; 2 part2610712
 VariPlan knives-SetHSB190; 2 part2610514
 VariPlan knives-SetHWB190; 2 part2610714
Further dimensions and dimensions in inches available on request

3. Planing

3.2 Four-sided moulders
3.2.3 Combination Tools

Planing

Multi-purpose planerhead, VariPlan/ProFix for jointing and profiling

Planing


Ideal for four-sided planing and at the same time shaping on the edges e.g. bevel, radius. Resharpenable tooling system with constant diameter and constant profile. Fast knife change of planing and profile knives in axial direction.

Tool body of steel with 2 HS-planer knives and 2 seatings for ProFix-profile knives.

Planing WW 240-2-06 *
Class.D
mm
SB
mm
ND
mm
BO
mm
BO max
mm
n max
min-1
ID Nr. 
*12513013640459000031700
*12518018640459000031701
*12523023640459000031702
*14013013050608000031703 
*14018018050608000031704 
*14023023050608000031705 


Spare knives
BEZQALABMVE STCKID Nr. 
VariPlan knives-SetHSB130; 2 part2610506
VariPlan knives-SetHWB130; 2 part2610706
VariPlan knives-SetHSB230; 2 part2610516
VariPlan knives-SetHWB230; 2 part2610716
VariPlan knives-SetHSB180; 2 part2610512
VariPlan knives-SetHWB180; 2 part2610712


Spare knives with profile
BEZQALABMR
mm
ID Nr. 
ProFix knife PF20;
R3; left-hand
HS-BPG026; SB203012031
ProFix knife PF20;
R3; right-hand
HS-BPG025; SB203012032
ProFix knife PF20;
R4; left-hand
HS-BPG026; SB204012033
ProFix knife PF20;
R4; right-hand
HS-BPG025; SB204012034
ProFix knife PF20;
R6; left-hand
HS-BPG026; SB206012035
ProFix knife PF20;
R6; right-hand
HS-BPG025; SB206012036
ProFix knife PF20;
R8; left-hand
HS-BPG026; SB208012037
ProFix knife PF20;
R8; right-hand
HS-BPG025; SB208012038
ProFix knife PF20;
R10; left-hand
HS-BPG026; SB2010012039
ProFix knife PF20;
R10; right-hand
HS-BPG025; SB2010012040
ProFix knife PF20;
R12; left-hand
HS-BPG026; SB2012012041
ProFix knife PF20;
R12; right-hand
HS-BPG025; SB2012012042
ProFix knife PF20;
R16; left-hand
HS-BPG026; SB2416012043 
ProFix knife PF20;
R16; right-hand
HS-BPG025; SB2416012044 
Planing

Multi-purpose planerhead, VariPlan/ProFix for jointing and profiling

Planing


Planing Spare knives with profile
BEZQALABMR
mm
Bevel °ID Nr. 
ProFix knife PF20;
R18; left-hand
HS-BPG026; SB2418 012045 
ProFix knife PF20;
R18; right-hand
HS-BPG026; SB2418 012046 
ProFix knife PF20;
14x45°; left-hand
HS-BPG026; SB20 14x45°012047
ProFix knife PF20;
14x45°; right-hand
HS-BPG026; SB20 14x45°012048
ProFix fluting knife PF20;
R10; left-hand
HS-BPG026; SB2010 012049 
ProFix fluting knife PF20;
R10; right-hand
HS-BPG026; SB2010 012050 
ProFix knife PF20;
R3; left-hand
HW-BPG026; SB203 012051
ProFix knife PF20;
R3; right-hand
HW-BPG026; SB203 012052
ProFix knife PF20;
R4; left-hand
HW-BSB204 012053
ProFix knife PF20;
R4; right-hand
HW-BSB204 012054
ProFix knife PF20;
R6; left-hand
HW-BSB206 012055
ProFix knife PF20;
R6; right-hand
HW-BSB206 012056
ProFix knife PF20;
R8; left-hand
HW-BSB208 012057
ProFix knife PF20;
R8; right-hand
HW-BSB208 012058
ProFix knife PF20;
R10; left-hand
HW-BSB2010 012059
ProFix knife PF20;
R10; right-hand
HW-BSB2010 012060
ProFix knife PF20;
R12; left-hand
HW-BSB2012 012061
ProFix knife PF20;
R12; right-hand
HW-BSB2012 012062
ProFix knife PF20;
R16; left-hand
HW-BSB2416 012063 
ProFix knife PF20;
R16; right-hand
HW-BSB2416 012064 
ProFix knife PF20;
R18; left-hand
HW-BSB2418 012065 
ProFix knife PF20;
R18; right-hand
HW-BSB2418 012066 
ProFix bevelling knife PF20;
14x45°; left-hand
HW-BSB20 14x45°012067
ProFix bevelling knife PF20;
14x45°; right-hand
HW-BSB20 14x45°012068
ProFix knife PF20;
R20; left-hand
HW-BSB2010 012069 
ProFix knife PF20;
R20; right-hand
HW-BSB2010 012070 


•  available ex stock
+ available at short notice