4. Tools with bore

4.1 Grooving

Adjustable grooving cutterset with spacers

Grooving

For cutting different groove widths in solid woods along and across grain, uncoated, veneered and coated timber products. For spindle moulders, moulders, edging and routing machines with/without CNC, double-end tenoners. Cutting width adjusted with spacers in 0.1 mm steps. 2-part set.

SW 501-1-01 *

Class.	D mm	SB mm	BO mm	BO _max mm	Z	NT	n min^-1	ID Nr.
*	150	4,0 - 7,5	30	50	2/2	20	5200 - 10100	0128100	•
*	180	4,0 - 7,5	30	50	2/2	35	4300 - 8400	0128101	•
*	200	4,0 - 7,5	30	50	2/2	45	3900 - 7600	0128102	•
*	250	4,0 - 7,5	30	50	2/2	60	3100 - 6000	0128103	•

Additional parts
WW 200-1 *

Class.	D mm	SB mm	BO mm	BO _max mm	Z	n min^-1	ID Nr.
*	150	3,8	30	50	2	5200 - 10100	0128130	•
*	180	3,8	30	50	2	4300 - 8400	0128131	•
*	200	3,8	30	50	2	3900 - 7600	0128132	•
*	250	3,8	30	50	2	3100 - 6000	0128133	•

Each additional part increases the SB by 3,6 mm.

Spare parts

ART mm	ABM mm	QAL min ^-1	ID Nr.
Turnblade knife (VE 10 pcs.)	18x18x1,95	HW	005114	•
Nut			005653	•
Spur (VE 10 pcs.)	14x14x1,2	HW	005130	•
Nut			005654	•
Key	T 15		117507	•
Key	T 9		005463	•
Setting gauge	0,3/0,8		005374	•

VE = Packing unit

Adjustable grooving cutterset with spacers

Grooving

SW 501-1-01 *

Class.	D mm	SB mm	BO mm	BO _max mm	Z	NT mm	n min^-1	ID Nr.
*	150	8,0-15,0	30	50	2/2	20	5200 - 10100	128104	•
*	180	8,0-15,0	30	50	2/2	35	4300 - 8400	128105	•
*	200	8,0-15,0	30	50	2/2	45	3900 - 7600	128106	•
*	250	8,0-15,0	30	50	2/2	60	3100 - 6000	128107	•

Additional parts
WW 200-1 *

Class.	D mm	SB mm	BO mm	BO _max mm	Z	n min^-1	ID Nr.
*	150	7,7	30	50	2	5200 - 10100	128134	•
*	180	7,7	30	50	2	4300 - 8400	128135	•
*	200	7,7	30	50	2	3900 - 7600	128136	•
*	250	7,7	30	50	2	3100 - 6000	128137	•

Each additional part increases the SB by 7,5 mm.

Spare parts

ART	ABM mm	QAL	ID Nr.
Turnblade knife (VE 10 pcs.)	7,7x8x1,5	HW	005053	•
Spurs (VE 10 pcs.)	14,0x14x2,0	HW	005099	•
Clamping wedge			009763	•
Screw			007380	•
Screw	M6x0,5x4,9		006243	•
Key	T 15		117507	•
Key	T 20		117503	•
Setting gauge	0,3/0,8		005374	•

VE = packing unit

Adjustable grooving cutterset – without spacers

Grooving

For cutting different groove widths in solid woods, uncoated, veneered and coated timber products. For spindle moulders and moulders, edging machines and doubleend tenoners. Groove width adjusted when mounted on spindle to any width. 2-part design on adjustable sleeve.

SF 502-1-02 *

Class.	D mm	SB mm	BO mm	BO _max mm	NT mm	Z	n min^-1	ID Nr.
*	150	5,0 - 9,5	30	35	25	6/6	5200 - 11400	020750	•
*	150	9,2 - 17,2	30	35	25	4/4	5200 - 11400	020751	•
*	150	5,0 - 9,5	40	50	20	6/6	5200 - 11400	020752	•
*	150	9,2 - 17,2	40	50	20	4/4	4300 - 9500	020753	•
*	180	5,0 - 9,5	30	35	40	6/6	4300 - 9500	020754	•
*	180	9,2 - 17,2	30	35	40	4/4	4300 - 9500	020755	•
*	180	5,0 - 9,5	40	50	35	6/6	4300 - 9500	020756	•
*	180	9,2 - 17,2	40	50	35	4/4	4300 - 9500	020757	•

Adjustable grooving cutterhead – without spacers

Grooving

SW 502-1-01 *

Class.	D mm	SB mm	BO mm	BO _max mm	NT mm	Z	n min^-1	ID Nr.
*	150	4,0 - 7,5	30	35	25	2/2	5200 - 10100	128150	•
*	150	8,0 - 15	30	35	25	2/2	5200 - 10100	128151	•
*	150	4,0 - 7,5	40	50	20	2/2	5200 - 10100	128152	•
*	150	8,0 - 15	40	50	20	2/2	5200 - 10100	128153	•
*	180	4,0 - 7,5	30	35	40	2/2	4300 - 8400	128154	•
*	180	8,0 - 15	30	35	40	2/2	4300 - 8400	128155	•
*	180	4,0 - 7,5	40	50	35	2/2	4300 - 8400	128156	•
*	180	8,0 - 15	40	50	35	2/2	4300 - 8400	128157	•

Spare parts

ART	ABM mm	for SB mm	QAL	ID Nr.
Turnblade knife (VE 10 pcs.)	18x18x1,95	4 - 7,8	HW	005114	•
Turnblade knife (VE 10 pcs.)	7,7x8x1,5	8 - 15,5	HW	005053	•
Nut				005653	•
Spur (VE 10 pcs.)	14x14x1,2	4 - 7,8	HW	005130	•
Spur (VE 10 pcs.)	14x14x2,0	8 - 15,5	HW	005099	•
Nut				005654	•
Screw	M4x0,5x3,2	4 - 7,8		006057	•
Screw	M6x0,5x4,9	8 - 15,5		006243	•
Clamping wedge		8 - 15,5		009763	•
Screw M5x20		8 - 15,5		007380	•
Key	T 8	8 - 15,5		005463	•
Key	T 15	8 - 15,5		117507	•
Key	T 20	8 - 15,5		117503	•
Setting gauge	0,3/0,8			005374	•

VE = packing unit

• available ex stock
+ available at short notice